42
JLR-7700 MK2 GPS Navigator
4.3 How to use the Navigation Information Screens
The navigation information screens provide you with a variety of information you require to steer the vessel.
The screens consist of the following three screens.
4.3.1 NAVIGATE Screen
The screen automatically changes to the NAVIGATE screen if the first position fixing was finished after
turning the power on.
{
Leg of the route plan
(currently selected route)
Local time (UTC time in case
the time difference has been
set to 0)
Bearing to the destination
from you vessel
(bearing of magnetic compass)
Distance to the destination
Time to go to the destination
Course deviation (Cross-Track Error)
and direction to steer
L : Steer to the left
R : Steer to the right
The shortest possible course
can be obtained by steering
the boat to display 0.00 for
the course deviation.
Current position
(Pressing the or key
will change the display
to the loran time difference)
Course over ground
(Magnetic bearing)
Speed over ground
DGPS fixing
Screen Key functions
NAVIGATE This screen mainly informs you on the bearing and distance to the next
destination along the route and the position of your vessel.
COURSE DIVIATION IND. This screen mainly informs you of the deviation from a planned course.
NAVIGATE AUX This screen enables you to select the operating mode of the equipment
among compass correction, display unit, and data output format.
Geodetic system
WGS-84
To Next Page
Loading...
