JRC JLR-7700MKII - Canceling the Route; Storing the Current Position (Event)

46
JLR-7700 MK2 GPS Navigator
4.3.1.4 Canceling the Route
Entering “X X X” for a destination can cancel the route plan.
The following operations can cancel a given preset route. Note that they will also cancel the route plan. (See
the item 4.5.3 “Route Plan” for details.) Note that the route plan can also be cancelled by the other methods.
See the item 4.5.3.2 “Canceling the Route Plan” for details.
Press the GOTO and CLR keys, which will highlight the X X X . Then, pressing the ENT key under this
condition will enter the X X X. Now, the preset route plan is canceled.
Change the input status for the destination as follows.
Press the GOTO key _ _ _ (This is the status that is waiting for the input.)
↓
Press the CLR key X X X (The route will be canceled.)
↓
Press the CLR key 0 0 2 (The display returns to the original mode before commencing
the cancel operation.)
4.3.1.5 Storing the Current Position (Event)
・ Press the EVENT key to store the current position at a waypoint number in the range of #400 to #499. The
current position thus stored is displayed with the ◇ mark on the PLOT screen.
・ Press the GOTO key to display the stored number on the PLOT screen. The stored number is displayed on
the right hand side of the ◇ mark. Press the CLR key if the number does not need to be displayed.