– 1 –
1. Specications
No.
Model
DDL-8000AB-MS DDL-8000AB-SH DDL-8000AB-SJ
Item
Semi-dry for standard materi-
als (Short tail)
Minute-quantity lubrication for
heavy-weight materials (Short tail)
Minute-quantity lubrication for
heavy-weight materials (Short tail)
1 Max. sewing speed 5000sti/min
*1
4500sti/min
*2
4500sti/min
*2
2 Max. stitch length Difference of stitch length 5 mm
3 Needle bar stroke 30.7mm 35mm 35mm
4 Take-up lever stroke 110mm 113mm 113mm
5
Thread trimming method
Double-edged rotary type
6
Shorter-thread remaining
function
With *7
7
Lower bobbin winder unit
Built-in the machine head (with bobbin thread holding plate)
8
Needle thread nipper
unit
（
NB type
）
Electromagnetic
9
Needle thread tension
Spring type
10 Presser foot pressure
Spring type
11 Number of patterns Sewing pattern : 99 patterns
(For the polygonal shape sewing, as many as 10 patterns can be registered.)
Cycle sewing pattern : 9 patterns
Custom-pitch pattern 20 patterns
Condensation custom pattern 9 patterns
12
Data com-
munication
USB
With
LAN
Without
13
Lubrication
system
Plate (needle bar) Grease lubrication Oil wick lubrication Oil wick lubrication
Hook Plunger pump type
Gearbox
Grease lubrication+Special surface processing
14
Oil sup-
ply
Plate (needle bar) Grease lubrication +
Special surface processing
Oil wick lubrication Oil wick lubrication
Hook With oil tank (capacity: 160 ml)
15
Oil to be
used
Plate (needle bar)
JUKI Grease A
(Part No.: 40006323)
No.1
or
7
*3
No.1
or
7
*3
Hook
No.1 or 7 *3
Gearbox
JUKI Grease A (product No.: 40006323)
16 Lifting amount of presser
By hand
：
5.5mm
Auto : 1st step 5.0mm
: 2nd step 8.5mm
17 Needle
DB×1(#11)#9 to
18
1738 (Nm75) Nm65
to
110
DB×1(#21)#20
to
23
1738
（
Nm130
）
Nm125 to
160
DB×1(#21)#20
to
23
1738
（
Nm130
）
Nm125 to
160
DP×5(#11)#9 to
18
134
（
Nm75
）
Nm65 to 110
DP×5(#21)#20
to
23
134
（
Nm130
）
Nm125 to
160
DP×5(#21)#20
to
23
134
（
Nm130
）
Nm125 to
160
18
Dimensions
From needle to ma-
chine arm (width)
303mm
From needle to ma-
chine arm (high)
137mm
Bed size 178mm × 517mm
19
Machine head drive Compact AC servomotor
：
550W
that is directly connected to the main shaft
（
direct-drive system
）
20 Machine head weight 40.2kg
21 Power consumption 330VA
22
Working temperature and
humidity
Temperature: 5 °C to 35°C, humidity: 35% to 85% (No dew condensation permissible)
23
Supply voltage and frequency
Rated voltage ±10%, 50/60Hz
24
Noise
SMS ;- Equivalent continuous emission sound pressure level (L
pA
) at the workstation:
A-weighted value of 78.7 dBA ; (Includes K
pA
= 2.5 dB) ; according to ISO 10821- C.6.2 -ISO 11204
GR2 at 4,000 sti/min.
PSH ;- Equivalent continuous emission sound pressure level (L
pA
) at the workstation:
A-weighted value of 77.5 dBA ; (Includes K
pA
= 2.5 dB) ; according to ISO 10821- C.6.2 -ISO 11204
GR2 at 4,000 sti/min.
*1
：
Stitch length
0.00
to
4.00
：
5,000sti/min,
stitch length
4.05
to
5.00
：
4,000sti/min
*2
：
Stitch length
0.00
to
4.00
：
4,500sti/min,
stitch length
4.05
to
5.00
：
4,000sti/min
*3
：
JUKI New Defrix Oil No. 1 or JUKI CORPORATION GENUINE OIL.7 (equivalent to ISO VG7)
*5
：Steady operation denotes the noise level produced when the machine is operated for 300 mm at a constant speed in the state
that straight sewing is performed and no other units are actuated.
*6
：Attachment device operation denotes the noise level produced while sewing a standard pattern for 300 mm operating
automatic auto-back, thread trimmer, and needle thread clamp.
*7
：The presence or absence of the shorter-thread remaining function denotes the presence or absence of the condensation
device.
When the shorter-thread remaining function is present, the condensation device is a standard item.
When the shorter-thread remaining function is absent, on the other hand, the condensation device is not a standard item.
The condensation device can be installed afterward.
To Next Page
Loading...
Need help?
General
