JUKI DDL-8000A Engineer's Manual

– 13 –
(4) Adjustment of inner hook presser position
WARNING :
Be sure to turn the power OFF before the following work in order to prevent personal injury due to
unintentional starting of the sewing machine.
Standard adjustment
AB
C
❶
❷
❶
❷
C
Height of the presser adjusting screw ❶ can be read
from the upper face value of the nut ❷.
Example: Approx. 40mm

JUKI DDL-8000A Specifications

General

Stitch Type	Lockstitch
Motor Type	Direct-drive motor
Thread Trimmer	Automatic
Max. Stitch Length	5mm
Needle Bar Stroke	30.7mm
Lift of the Presser Foot	By hand: 5.5mm, By knee: 13mm
Control Panel	Digital
Lubrication	Automatic