JUKI DDL-8000A Engineer's Manual

– 33 –
(9) Adjustment of the amount of feeding
WARNING :
Be sure to turn the power OFF before the following work in order to prevent personal injury due to
unintentional starting of the sewing machine.
Standard adjustment
4) Adjustment of normal/reverse stitching
5) Adjustment of Feed 0
Method by removing the gear box cover (standard adjustment)
❽
❼
❶
❷
❶
❷
❸
❺
❹
❻

JUKI DDL-8000A Specifications

General

Stitch Type	Lockstitch
Motor Type	Direct-drive motor
Thread Trimmer	Automatic
Max. Stitch Length	5mm
Needle Bar Stroke	30.7mm
Lift of the Presser Foot	By hand: 5.5mm, By knee: 13mm
Control Panel	Digital
Lubrication	Automatic