JUKI DDL-8000A Engineer's Manual

– 27 –
(8) Adjustment of the origin of a presser lifter motor
WARNING :
Be sure to turn the power OFF before the following work in order to prevent personal injury due to
unintentional starting of the sewing machine.
Standard adjustment
If the cam roller
⓮
is
raised, the problem that
the presser foot sole
fails to come in contact
with the throat plate can
occur.
󱢶
⓮
Light-contact state
Engraved line
A
❷
❶
0.3 mm feeler
Engraved line
B
Engraved line
A
❸
❹

JUKI DDL-8000A Specifications

General

Stitch Type	Lockstitch
Motor Type	Direct-drive motor
Thread Trimmer	Automatic
Max. Stitch Length	5mm
Needle Bar Stroke	30.7mm
Lift of the Presser Foot	By hand: 5.5mm, By knee: 13mm
Control Panel	Digital
Lubrication	Automatic