– 81 –
No.
How long the key
must be pressed
Function
❶
Short time Used to changing over the automatic reverse feed stitching at
the beginning of sewing to: Reverse feed stitching / Double
reverse feed stitching / Disable
Long time Used to change over the thread clamp operation between enable
/ disable
❷
Short time Used to change over the automatic reverse feed stitching at the
end of sewing to: Reverse feed stitching / Double reverse feed
stitching / Disable
Long time Used to change over the needle bar stop position at the time of
stopping the sewing machine between up and down
❸
Short time Used to set the type of stitching to free stitching
Long time Used to change over the thread trimming operation between
enable / disable.
❹
Short time Used to set the type of stitching to overlapped stitching
Long time Used to change over the lifting of the presser foot during sewing
between "automatically lift / not lift".
❺
Short time Used to carry out setting of the polygonal-shape stitching.
Long time Used to changeover the automatic lifting of presser foot after
thread trimming between lift / not lift
❻
A
Short time Used to increase the maximum sewing speed
B
Long time Used to decrease the maximum sewing speed
4
.
Operation panel
(1) Function of panel key
❶
❷
❻ -A
❽
❿
❺
❸
❹
⓫
⓭
❻ -B
❼ -B
❾
⓬
❼ -A
To Next Page
Loading...
Need help?
General
