JUKI DDL-8000A Engineer's Manual

– 31 –
❶
❷
A
❸
B
❹
(9) Adjustment of the amount of feeding
WARNING :
Be sure to turn the power OFF before the following work in order to prevent personal injury due to
unintentional starting of the sewing machine.
Standard adjustment
1) Adjustment of forward feed stitch length
2) Reverse feed stitch length check (manual)
3) Reverse feed stitch length check (electrically-operated)

JUKI DDL-8000A Specifications

General

Stitch Type	Lockstitch
Motor Type	Direct-drive motor
Thread Trimmer	Automatic
Max. Stitch Length	5mm
Needle Bar Stroke	30.7mm
Lift of the Presser Foot	By hand: 5.5mm, By knee: 13mm
Control Panel	Digital
Lubrication	Automatic