JUKI DDL-8000A Engineer's Manual

– 30 –
Adjustment Procedure
<Timing of origin search operation>
After the power is turned on, conduct origin search and move it to the presser foot 1st step lifting position
or presser foot 2nd step lifting position when depressing the back part of the pedal to the 1st or 2nd step
the rst time.

JUKI DDL-8000A Specifications

General

Stitch Type	Lockstitch
Motor Type	Direct-drive motor
Thread Trimmer	Automatic
Max. Stitch Length	5mm
Needle Bar Stroke	30.7mm
Lift of the Presser Foot	By hand: 5.5mm, By knee: 13mm
Control Panel	Digital
Lubrication	Automatic