JUKI DDL-8000A Engineer's Manual

– 72 –
Adjustment Procedure Results of Improper Adjustment
1) Conguration
• Oil quantity sensor
The oil quantity sensor ❹ that detects the oil amount is installed
inside the oil tank.
Refer to "3.-(15)-2) Procedure of attaching and detaching" for how
to replace the oil quantity sensor.

JUKI DDL-8000A Specifications

General

Stitch Type	Lockstitch
Motor Type	Direct-drive motor
Thread Trimmer	Automatic
Max. Stitch Length	5mm
Needle Bar Stroke	30.7mm
Lift of the Presser Foot	By hand: 5.5mm, By knee: 13mm
Control Panel	Digital
Lubrication	Automatic