F 9
0708.GB
4.2 Fuels, coolants and lubricants
Handling consumables: Consumables must always be handled correctly. Follow
the manufacturer’s instructions.
F
Improper handling is hazardous to health, life and the environment. Consumables
must only be stored in appropriate containers. They may be flammable and must
therefore not come into contact with hot components or naked flames.
Only use clean containers when filling up with consumables. Do not mix consumables
of different grades. The only exception to this is when mixing is expressly stipulated
in the Operating Manual.
Avoid spillage. Spilled liquids must be removed immediately with suitable bonding
agents and the bonding agent / consumable mixture must be disposed of in
accordance with regulations.
EKS 410 fuels and lubricants
* Plus 2% additive 68 ID (order no. 50307735)
F
The trucks are supplied from the factory with “HLP D22” hydraulic oil or the
“Plantohyd 22 S” BIO hydraulic oil + 2 % 68 ID additive.
You cannot change from the Plantohyd 22 S BIO hydraulic oil to HLP D22. The same
applies to changing from HLP D22 hydraulic oil to Plantohyd 22 S BIOhydraulic oil.
Furthermore, you cannot mix HLP D22 hydraulic oilt Plantohyd 22 S BIO hydraulic oil.
Code Order no.
Quantity
supplied
Capacity Description Used for
A
51037497
51037494
5 l
1 l
approx.
30 l
HLP D22 including 2 %
share additive 68 ID
Hydraulic System
51085361* 5 l
Plantohyd 22 S
(BIO hydraulic oil)
B 50022968 5 l
approx.
3.6 l
SAE 80 EP API GL4 Transmission
E
14038650
400 g
(cartridge)
---
Grease -
Lithium KP2K-30
(DIN 51825)
General
29201430 1 kg
G 29201280 400 ml ---
Chain spray
Tunfluid LT 220
Mast
track
Lift chains
H 50157382 1 kg 400 g
Grease -
Lithium K3K-20
(DIN 51825)
Front wheel
bearings
F 9
0708.GB
4.2 Fuels, coolants and lubricants
Handling consumables: Consumables must always be handled correctly. Follow
the manufacturer’s instructions.
F
Improper handling is hazardous to health, life and the environment. Consumables
must only be stored in appropriate containers. They may be flammable and must
therefore not come into contact with hot components or naked flames.
Only use clean containers when filling up with consumables. Do not mix consumables
of different grades. The only exception to this is when mixing is expressly stipulated
in the Operating Manual.
Avoid spillage. Spilled liquids must be removed immediately with suitable bonding
agents and the bonding agent / consumable mixture must be disposed of in
accordance with regulations.
EKS 410 fuels and lubricants
* Plus 2% additive 68 ID (order no. 50307735)
F
The trucks are supplied from the factory with “HLP D22” hydraulic oil or the
“Plantohyd 22 S” BIO hydraulic oil + 2 % 68 ID additive.
You cannot change from the Plantohyd 22 S BIO hydraulic oil to HLP D22. The same
applies to changing from HLP D22 hydraulic oil to Plantohyd 22 S BIOhydraulic oil.
Furthermore, you cannot mix HLP D22 hydraulic oilt Plantohyd 22 S BIO hydraulic oil.
Code Order no.
Quantity
supplied
Capacity Description Used for
A
51037497
51037494
5 l
1 l
approx.
30 l
HLP D22 including 2 %
share additive 68 ID
Hydraulic System
51085361* 5 l
Plantohyd 22 S
(BIO hydraulic oil)
B 50022968 5 l
approx.
3.6 l
SAE 80 EP API GL4 Transmission
E
14038650
400 g
(cartridge)
---
Grease -
Lithium KP2K-30
(DIN 51825)
General
29201430 1 kg
G 29201280 400 ml ---
Chain spray
Tunfluid LT 220
Mast
track
Lift chains
H 50157382 1 kg 400 g
Grease -
Lithium K3K-20
(DIN 51825)
Front wheel
bearings