Jungheinrich EKS 410 User Manual

E 7
0206.GB
2.4 Truck operational status symbols
The operational status of the truck when it is switched on is indicated by symbols in
the display unit.
Safety gates open
Foot switch not pressed
When the following symbols are displayed you must carry out a reference movement
in accordance with the display, i.e. the Primary raise must be raised approx. 10 cm
and then lowered again. This is the only way for the controller to release all the truck
movements at full speed.
Referencing: Primary raise - lift
Referencing: Primary raise - lower
E 7
0206.GB
2.4 Truck operational status symbols
The operational status of the truck when it is switched on is indicated by symbols in
the display unit.
Safety gates open
Foot switch not pressed
When the following symbols are displayed you must carry out a reference movement
in accordance with the display, i.e. the Primary raise must be raised approx. 10 cm
and then lowered again. This is the only way for the controller to release all the truck
movements at full speed.
Referencing: Primary raise - lift
Referencing: Primary raise - lower

Jungheinrich EKS 410 Specifications

General

Brand	Jungheinrich
Model	EKS 410
Category	Forklifts
Language	English