Start time 2013-05-23 14:39:18 IST
Uptime 1 hour, 20 minutes, 22 seconds
show chassis fpc pic-status (MX104 Router)
user@host> show chassis fpc pic-status
Slot 0 Online
Slot 1 Online
PIC 0 Online 10x 1GE(LAN) -E SFP
PIC 1 Online 10x 1GE(LAN) -E SFP
Slot 2 Online
PIC 0 Online 4x 10GE(LAN) SFP+
show chassis fpc (MX104-40G Router)
user@host> show chassis fpc
Temp CPU Utilization (%) CPU Utilization (%) Memory Utilization (%)
Slot State (C) Total Interrupt 1min 5min 15min DRAM (MB)
Heap Buffer
0 Online 48 18 6 2048
9 13
1 Online 48 18 6 2048
9 13
2 Online 48 18 6 2048
9 13
show chassis fpc detail (MX104-40G Router)
user@host> show chassis fpc detail
Slot 0 information:
State Online
Temperature 48 (C)
Total CPU DRAM 2048 MB
Total SRAM 403 MB
Total SDRAM 1316 MB
Start time 2015-02-27 03:05:54 PST
Uptime 2 hours, 38 minutes, 27 seconds
Slot 1 information:
State Online
Temperature 48 (C)
Total CPU DRAM 2048 MB
Total SRAM 403 MB
Total SDRAM 1316 MB
Start time 2015-02-27 03:05:55 PST
Uptime 2 hours, 38 minutes, 26 seconds
Slot 2 information:
State Online
Temperature 48 (C)
Total CPU DRAM 2048 MB
Total SRAM 403 MB
Total SDRAM 1316 MB
Start time 2015-02-27 03:05:55 PST
Uptime 2 hours, 38 minutes, 26 seconds
show chassis fpc pic-status (MX104-40G Router)
MIC slots 1/0 and 1/1 have been disabled by default on the MX104-40G routers. If you
install MICs on those slots, the MIC details are displayed when you run the show chassis
fpc pic-status command. However, the status of the MIC is displayed as offline.
user@host> show chassis fpc pic-status
Copyright © 2016, Juniper Networks, Inc.172
Port Mirroring Feature Guide for EX9200 Switches
To Next Page
