Slot 0 Online
PIC 0 Online MS-MIC-16G
PIC 2 Online 10x 1GE(LAN) SFP
PIC 3 Online 10x 1GE(LAN) SFP
Slot 1 Online
PIC 0 Offline 10x 1GE(LAN) SFP
PIC 1 Offline 10x 1GE(LAN) SFP
Slot 2 Online
PIC 0 Online 4x 10GE(LAN) SFP+
show chassis fpc pic-status (MX104-40G Router with Upgrade License)
When you install the upgrade license on MX104-40G, MIC slots 1/0 and 1/1 are enabled.
If you install MICs on those slots, the MIC details are displayed and the status of the MIC
is displayed as online when you run the show chassis fpc pic-status command.
user@host> show chassis fpc pic-status
Slot 0 Online
PIC 0 Online MS-MIC-16G
PIC 2 Online 10x 1GE(LAN) SFP
PIC 3 Online 10x 1GE(LAN) SFP
Slot 1 Online
PIC 0 Online 10x 1GE(LAN) SFP
PIC 1 Online 10x 1GE(LAN) SFP
Slot 2 Online
PIC 0 Online 4x 10GE(LAN) SFP+
show chassis fpc (MX240 Router)
user@host> show chassis fpc
Temp CPU Utilization (%) Memory Utilization (%)
Slot State (C) Total Interrupt DRAM (MB) Heap Buffer
0 Empty
1 Online 34 6 0 1024 18 30
2 Online 33 9 0 1024 24 30
show chassis fpc (MX480 Router)
user@host> show chassis fpc
Temp CPU Utilization (%) Memory Utilization (%)
Slot State (C) Total Interrupt DRAM (MB) Heap Buffer
0 Empty
1 Online 36 9 0 1024 17 57
2 Empty
3 Empty
4 Empty
5 Empty
show chassis fpc detail (EX9200 Switch)
user@switch> show chassis fpc detail
Slot 2 information:
State Online
Temperature 37
Total CPU DRAM 2048 MB
Total RLDRAM 331 MB
Total DDR DRAM 1536 MB
Start time: 2014-03-12 15:35:28 UTC
Uptime: 1 hour, 4 minutes, 29 seconds
Max Power Consumption 239 Watts
Slot 3 information:
173Copyright © 2016, Juniper Networks, Inc.
Chapter 13: Operational Commands: Packet Forwarding Engine Components
To Next Page
