Juniper EX9200 - Page 196

Max MIC0 Power Consumption 50 Watts
Max MIC1 Power Consumption 50 Watts
Max MPC Total Power Consumption 585 Watts
show chassis fpc (MX2010 Routers)
user@host> show chassis fpc
Temp CPU Utilization (%) Memory Utilization (%)
Slot State (C) Total Interrupt DRAM (MB) Heap Buffer
0 Online 34 9 0 2048 18 13
1 Online 32 9 0 2048 15 13
2 Empty
3 Empty
4 Empty
5 Empty
6 Empty
7 Empty
8 Online 31 13 0 2048 11 13
9 Online 33 10 0 2048 18 13
show chassis fpc (MX2010 Router with Fabric Grant Bypass Enabled)
Following is the output of the show chassis fpc command on an MX2010 router with
Switch Fabric Board (SFB), where fabric grant bypass is enabled by default. All MPCs
power on.
user@host> show chassis fpc
Temp CPU Utilization (%) Memory Utilization (%)
Slot State (C) Total Interrupt DRAM (MB) Heap Buffer
0 Online 34 20 0 2048 9 14
1 Offline 33 22 0 2048 9 14
2 Online 33 17 0 2048 9 14
3 Offline 34 25 0 2048 9 14
4 Online 32 27 0 2048 9 14
5 Offline 32 26 0 2048 9 14
6 Empty
7 Empty
8 Empty
9 Empty
show chassis fpc (MX2010 Router with Fabric Grant Bypass Disabled)
Following is the output of the show chassis fpc command on an MX2010 router with
Switch Fabric Board (SFB), where fabric grant bypass has been disabled. MPC1
(MX-MPC1-3D), MPC2 (MX-MPC2-3D), and the 16-port 10-Gigabit Ethernet MPC
(MPC-3D-16XGE-SFP) do not power on after you disable fabric grant bypass and reboot
the router. Also, FPC misconfiguration alarms are generated.
user@host> show chassis fpc
Temp CPU Utilization (%) Memory Utilization (%)
Slot State (C) Total Interrupt DRAM (MB) Heap Buffer
0 Online 34 20 0 2048 9 14
1 Offline ---FPC misconfiguration---
2 Online 33 17 0 2048 9 14
3 Offline ---FPC misconfiguration---
4 Online 32 27 0 2048 9 14
5 Offline ---FPC misconfiguration---
6 Empty
7 Empty
Copyright © 2016, Juniper Networks, Inc.180
Port Mirroring Feature Guide for EX9200 Switches