Juniper EX9200 - Page 197

8 Empty
9 Empty
show chassis fpc pic-status (MX2010 Router with Fabric Grant Bypass Enabled)
Following is the output of the show chassis fpc pic-status command on an MX2010 router
with Switch Fabric Board (SFB), where fabric grant bypass has been enabled by default.
All MPCs power on.
user@host> show chassis fpc pic-status
Slot 0 Present MPCE Type 3 3D
Slot 1 Present MPC Type 2 3D EQ
Slot 2 Present MPCE Type 3 3D
Slot 3 Present MPC 3D 16x 10GE
Slot 4 Present MPCE Type 3 3D
Slot 5 Present MPCE Type 1 3D Q
show chassis fpc pic-status (MX2010 Router with Fabric Grant Bypass Disabled)
Following is the output of the show chassis fpc pic-status command on an MX2010 router
with Switch Fabric Board (SFB), where fabric grant bypass has been disabled. MPC1
(MX-MPC1-3D), MPC2 (MX-MPC2-3D), and the 16-port 10-Gigabit Ethernet MPC
(MPC-3D-16XGE-SFP) do not power on after you disable fabric grant bypass mode and
reboot the router.
user@host> show chassis fpc pic-status
Slot 0 Present MPCE Type 3 3D
Slot 1 Offline MPC Type 2 3D EQ
Slot 2 Present MPCE Type 3 3D
Slot 3 Offline MPC 3D 16x 10GE
Slot 4 Present MPCE Type 3 3D
Slot 5 Offline MPCE Type 1 3D Q
show chassis fpc (MX2020 Routers)
user@host> show chassis fpc
Temp CPU Utilization (%) Memory Utilization (%)
Slot State (C) Total Interrupt DRAM (MB) Heap Buffer
0 Online 10 12 0 2048 18 13
1 Online 8 9 0 2048 18 13
2 Online 7 9 0 2048 18 13
3 Online 8 10 0 2048 18 13
4 Online 9 10 0 2048 18 13
5 Online 8 9 0 2048 18 13
6 Online 8 10 0 2048 18 13
7 Online 9 9 0 2048 18 13
8 Online 9 10 0 2048 18 13
9 Online 10 9 0 2048 18 13
10 Online 16 8 0 2048 18 13
11 Online 11 10 0 2048 18 13
12 Online 10 10 0 2048 18 13
13 Online 11 9 0 2048 18 13
14 Online 12 10 0 2048 18 13
15 Online 13 9 0 2048 18 13
16 Online 13 9 0 2048 18 13
17 Online 12 9 0 2048 18 13
18 Online 12 8 0 2048 18 13
19 Online 14 10 0 2048 18 13
181Copyright © 2016, Juniper Networks, Inc.
Chapter 13: Operational Commands: Packet Forwarding Engine Components