Juniper EX9200

Release Information Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Command introduced in Junos OS Release 11.1 for QFX Series.
Command introduced in Junos OS Release 12.2 for ACX Series Universal Access Routers.
Command introduced in Junos OS Release 12.3 for MX2020 3D Universal Edge Routers.
Command introduced in Junos OS Release 12.3 for MX2010 3D Universal Edge Routers.
Command introduced in Junos OS Release 13.2 for PTX Series Packet Transport Routers.
Command introduced in Junos OS Release 13.2 for MX104 3D Universal Edge Routers.
Command introduced in Junos OS Release 14.1X53-D20 for the OCX Series.
transport option introduced in Junos OS Release 16.1R1 for MX Series Routers.
Description Display status information about the PIC installed in the specified Flexible PIC
Concentrator (FPC) and PIC slot.
Options fpc-slot slot-number—Display information about the PIC in this particular FPC slot:
• On a TX Matrix router, if you specify the number of the T640 router by using the
lcc number option (the recommended method), replace slot-number with a value
from 0 through 7. Otherwise, replace slot-number with a value from 0 through 31.
Likewise, on a TX Matrix Plus router, if you specify the number of the T1600 router
by using the lcc number option (the recommended method), replace slot-number
with a value from 0 through 7. Otherwise, replace slot-number with a value from
0 through 31. For example, the following commands have the same result:
user@host> show chassis pic fpc-slot 1 lcc 1 pic-slot 1
user@host> show chassis pic fpc-slot 9 pic-slot 1
• M120 routers only—Replace slot-number with a value from 0 through 5.
• MX80 routers only—Replace slot-number with a value from 0 through 1.
• MX104 routers only—Replace slot-number with a value from 0 through 2.
• MX240 routers only—Replace slot-number with a value from 0 through 2.
• MX480 routers only—Replace slot-number with a value from 0 through 5.
• MX960 routers only—Replace slot-number with a value from 0 through 11.
• MX2010 routers only—Replace slot-number with a value from 0 through 9.
• MX2020 routers only—Replace slot-number with a value from 0 through 19.
• Other routers—Replace slot-number with a value from 0 through 7.
• EX Series switches:
• EX3200 switches and EX4200 standalone switches—Replace slot-number with
0.
• EX4200 switches in a Virtual Chassis configuration—Replace slot-number with
a value from 0 through 9 (switch’s member ID).
Copyright © 2016, Juniper Networks, Inc.388
Port Mirroring Feature Guide for EX9200 Switches