Table 17: Site Preparation Checklist (continued)
DatePerformed byFor More InformationItem or Task
•
Determining Transceiver Support for the
PTX1000 on page 58
•
Cable and Connector Specifications for MX and
PTX Series Devices on page 59
Acquire cables and
connectors:
•
Determine the number
of cables needed based
on your planned
configuration.
•
Review the maximum
distance allowed for each
cable. Choose the length
of cable based on the
distance between the
hardware components
being connected.
Plan the cable routing and
management.
RELATED DOCUMENTATION
PTX1000 Installation Safety Guidelines | 74
Chassis and Component Lifting Guidelines | 136
PTX1000 Site Guidelines and Requirements
IN THIS SECTION
PTX1000 Environmental Requirements and Specifications | 52
General Site Guidelines | 53
PTX1000 Chassis Grounding Cable and Lug Specifications | 53
PTX1000 Clearance Requirements for Airflow and Hardware Maintenance | 54
PTX1000 Physical Specifications | 55
Site Electrical Wiring Guidelines | 56
PTX1000 Rack Requirements | 56
51
To Next Page
Loading...
