Figure 29: Attaching Rear-Mounting Blades to the Rack
10. Ensure that the PTX1000 chassis is level by verifying that all the screws on the front of the rack are
aligned with the screws at the back of the rack.
RELATED DOCUMENTATION
PTX1000 Site Preparation Checklist | 50
Connecting the PTX1000 to Power
IN THIS SECTION
Connecting the PTX1000 to Ground | 81
Connecting AC Power to the PTX1000 | 82
Connecting DC Power to the PTX1000 | 85
80
To Next Page
Loading...
