Juniper PTX1000 - USB Port Specifications for the PTX1000

Table 29: Console Port Connector Pinouts for the PTX1000
DescriptionSignalPin
Request to sendRTS Output1
Data terminal readyDTR Output2
Transmit dataTxD Output3
Signal groundSignal Ground4
Signal groundSignal Ground5
Receive dataRxD Input6
Data carrier detectDCD Input7
Clear to sendCTS Input8
USB Port Specifications for the PTX1000
USB flash drives used with the PTX1000 must support USB 2.0 or later.
CAUTION: Remove the USB flash drive before upgrading Junos OS or rebooting a
PTX1000. Failure to do so could expose your router to unpredictable behavior.
RELATED DOCUMENTATION
PTX1000 Management Panel | 32
71