Juniper PTX1000 - Step 3: Keep Going; Safety Warnings Summary

Connecting the PTX1000 to External Devices | 89
Connecting the PTX1000 to a Management Ethernet Device | 89
Connecting the PTX1000 to a Management Console | 90
Performing the Initial Software Configuration for the PTX1000 | 92
Powering Off the PTX1000 | 94
Maintaining Components
4
Maintaining the PTX1000 Fan Modules | 98
Removing a Fan Module from the PTX1000 | 98
Installing a Fan Module in the PTX1000 | 99
Maintaining the PTX1000 Power Supplies | 101
Removing a Power Supply from the PTX1000 | 101
Installing a Power Supply in a PTX1000 | 103
Maintaining the PTX1000 Transceivers and Fiber-Optic Cables | 104
Removing a Transceiver from the PTX1000 | 105
Installing a Transceiver in the PTX1000 | 106
Disconnecting a Fiber-Optic Cable from the PTX1000 | 108
Connecting a Fiber-Optic Cable to the PTX1000 | 109
Maintaining Fiber-Optic Cables in a PTX1000 | 110
Uninstalling the PTX1000 | 111
Troubleshooting Hardware
5
Troubleshooting the PTX1000 | 114
PTX1000 Troubleshooting Resources Overview | 114
PTX1000 Alarm Messages Overview | 115
Chassis Alarm Messages on the PTX1000 | 115
Returning the Chassis or Components
6
Returning the PTX1000 Chassis or Components | 121
Locating the Serial Number on a PTX1000 Chassis or Component | 121
Listing the Chassis and Component Details by Using the CLI | 122
Locating the Chassis Serial Number ID Label on a PTX1000 | 123
vi