•
Gigabit Ethernet Power over Ethernet (PoE) injector support
•
IEEE 802.3af PoE compatibility
Ceiling and Wall Mounting
The WLA532 access point can be mounted to a recessed 15/16-in. ceiling-tile rail without
disrupting rail or tile alignment. The following mounting adapters are provided with the
access point in an auxiliary mounting kit:
•
9/16-in. recessed ceiling-tile-rail adapter
•
Wall-mount bracket for offset wall mounting and for providing cable bend radius for
easy installation
•
North America single junction box adapter (minimum extension from wall, covers wall
box and cables)
•
European single junction box adapter (minimum extension from wall, covers wall box
and cables)
Physical and Compliance Specifications
The mechanical and compliance specifications for the WLA532 access point are listed
in Table 3 on page 12.
Table 3: Mechanical and Compliance Specification for WLA532
DescriptionSpecification
Length: 5.71 in. (14.5 cm)
Width: 5.37 in. (13.65 cm)
Height: 2.11 in. (5.35 cm)
Size
Without mounting bracket: 13.87 ounces (393.2 grams)Weight
631 cm
3
Volume
32° F through +122° F (0° C through 50° C)Operating temperature
-40° F through +158° F (-40° C through +70° C)Storage temperature
5% to 95% noncondensingHumidity
Directive 2002/95/EC, 2006/122/EC China RoHSRoHs/ IEEE
40 V to 54 V (optimal operational voltage and current in Power
over Ethernet entry)
IEEE 802.3af
Power over Ethernet (PoE)
Health/status and radio LEDs (For descriptions of the LEDs, see
“Status LEDs on WLA532 Access Points” on page 6).
Status indicators
Copyright © 2012, Juniper Networks, Inc.12
WLA532 Access Point Hardware Documentation
To Next Page
Loading...
