Juniper WLA532 - Figure 19: Release the Access Point; Figure 20: Secure the Access Point with the Security Screw and Tool

Figure 19: Release the Access Point
NOTE: We recommend that you use the optional security kit (separately
orderable) to secure the access point. The kit includes a special tool and
a security screw. Be sure that you retain the tool so that you can unlock
and move the access point. Never use a power tool to insert or remove
the security screw.
8. To lock the access point into place, secure the security screw in through the release
button by using the tool provided with the security kit (see Figure 20 on page 42). Do
not overtighten the screw.
Figure 20: Secure the Access Point with the Security Screw and Tool
Copyright © 2012, Juniper Networks, Inc.42
WLA532 Access Point Hardware Documentation