Figure 10: Releasing the Access Point
NOTE: We recommend that you use the optional security kit (separately
orderable) to secure the access point. The kit includes a special tool and
a security screw. Be sure that you retain the tool so that you can unlock
and move the access point. Never use a power tool to insert or remove
the security screw.
10. To lock the access point into place, secure the security screw in through the release
button by using the tool provided with the security kit (see Figure 11 on page 36). Do
not overtighten the screw.
Figure 11: Locking the Access Point onto the Ceiling Tile
Related
Documentation
Installing the WLA532 Access Point on the Wall Using Hardware Kits on page 36•
Installing the WLA532 Access Point on the Wall Using Hardware Kits
The primary method of installing the WLA532 access point is mounting it on the ceiling;
however, you can also install the access point on the wall by using one of three separately
orderable wall-mount kits that can be purchased at
https://www.juniper.net/customers/support/.
Copyright © 2012, Juniper Networks, Inc.36
WLA532 Access Point Hardware Documentation
To Next Page
Loading...
