Juniper WLA532 - Requirements and Specifications for 5-Ghz Radios on WLA532 Access; Figure 4: Horizontal-Plane Radiation Pattern (Omnidirectional) for a; Figure 5: Vertical-Plane Radiation Pattern (5-Degree Downtilt) for a

Figure 4: Horizontal-Plane Radiation Pattern (Omnidirectional) for a
Ceiling-Mounted Access Point
Figure 5 on page 27 shows the vertical-plane radiation pattern for the access point. The
pattern provides maximum antenna gains along the outer edges of the access point,
with a 5-degree downtilt.
Figure 5: Vertical-Plane Radiation Pattern (5-Degree Downtilt) for a
Ceiling-Mounted Access Point
Related
Documentation
• Requirements and Specifications for 2.4-GHz Radios on WLA532 Access Points on
page 25
• Requirements and Specifications for 5-GHz Radios on WLA532 Access Points on
page 25
27Copyright © 2012, Juniper Networks, Inc.
Chapter 5: Requirements and Specifications