CHAPTER 4
Planning Guidelines and Safety Standards
•
Planning Guidelines for Using RingMaster to Plan a Mobility System on page 19
•
General Safety Standards and Agencies for Access Points on page 19
•
WLA Access Point Radio Frequency Exposure Guidelines on page 20
Planning Guidelines for Using RingMaster to Plan a Mobility System
The Juniper Networks Mobility System is an enterprise wireless LAN (WLAN) solution
that seamlessly integrates with an existing wired enterprise network. The Mobility System
provides secure connectivity to both wireless and wired users in large environments such
as office buildings, hospitals, and university campuses.
If you are using RingMaster software to plan your Mobility System installation, we
recommend that you create and verify a network plan for the entire installation and
generate a wireless LAN access point (WLA) work order using RingMaster before installing
the WLAs. A network plan and the WLA work order generated from RingMaster provide
the following information about WLA installation and configuration:
•
Number of WLAs required for adequate WLAN capacity in each coverage area
•
Details of installation location for each WLA
•
Settings for all WLAs in the WLAN
After you have created the plan and reviewed it, you can arrange for the WLAN installation.
System administrators and anyone involved in the installation of the WLAN system are
responsible for its proper setup and operation in accordance with all rules and regulations
of the country in which the network equipment operates.
Related
Documentation
General Safety Standards and Agencies for Access Points on page 19•
General Safety Standards and Agencies for Access Points
For a complete list of safety warnings and detailed compliance information, see the
Juniper Networks Regulatory Guide in the Wireless LAN Services documentation at
http://www.juniper.net/techpubs/en_US/release-independent/wireless/information-produ
cts/topic-collections/wireless-lan/hardware/regulatory-info.pdf .
19Copyright © 2012, Juniper Networks, Inc.
To Next Page
Loading...
