13
PREFACE
n NOTES
• A fully exhausted battery takes roughly 5 hours to charge.
• To use the camera immediately, use the camera while it is connected to the AC
power adapter.
6
Open the SmartMedia cover
(
aP.24).
• Slide the SmartMedia cover release
in the direction of the arrow and then
release.
7
Insert the SmartMedia.
• Slide the SmartMedia in slowly so
that the contact area faces the gold
line on the SmartMedia holder
(towards the front of the camera) and
push the SmartMedia in fully.
8
Close the SmartMedia cover.
9
Slide the POWER switch to
the right (
aP.21).
• Slide the switch in the direction of
the arrow and then release it after
about one second.
• The direction indicator flashes and
rotates.
10
Set the Mode dial to [e]
(
aP.59).
• The menu screen appears.
• Format the SmartMedia.
To Next Page
Loading...
