Setting the White Balance
You can select one of five white balance settings: Outdoor, Shade, Fluorescent
1, Fluorescent 2 and Incandescent. The Outdoor setting is normally used. Use
the other settings to set the white balance when you are shooting in shadow or
in special lighting.
n NOTES
• The default setting is [a] (Outdoor).
• This setting does not apply when the flash is used.
1
Set the Mode dial to [R].
• If the LCD monitor is switched off,
press the [DISP] button.
2
Press the [MENU/EXE]
button.
• The menu screen appears.
3
Use the [3] or [4] button to
select [W.B.].