BASIC
PHOTOGRAPHY
39
Using the Macro (close-up) function, you can take pictures of subjects at
distances of between 9 cm and 50 cm from the camera.
1
Press the [m] (Macro) button.
• The live image (the video image
shown before a picture is taken)
appears on the LCD monitor.
•“
m” appears on the LCD panel.
2
Look at the image on the LCD
monitor to compose the shot,
and then take the picture.
• See P.33 for information on how to
take the picture.
To Exit Macro Mode
Press the [m] (Macro) button.
n NOTES
• The flash only operates when Forced flash mode (aP.40) is specified.
• The Macro function is automatically switched off when you switch the camera off, press the
[DISP] button to switch the LCD monitor off, or if the Auto Power Off function is triggered.
• The image displayed changes each time you press the [DISP] button (
aP.29).
m Macro (Close-Up) Mode
To Next Page
Loading...
Need help?
General
