ADVANCED
FEATURES
66
s Self-Timer Mode
1
Set the Mode dial to [s].
• The camera switches to self-timer
mode.
• When you press the [DISP] button,
“SELF-TIMER” appears on the LCD
monitor.
2
Compose the picture and
press the shutter button
down halfway.
• The camera automatically sets the
focus and the exposure. Once the
focus is set, the viewfinder lamp
turns green.
“STANDBY” appears on the LCD
monitor.
3
Without lifting your finger off,
press the shutter button
down fully.
• The self-timer lamp on the front of
the camera lights. The shutter
operates after 10 seconds. (The self-
timer lamp lights for the first 5
seconds and then flashes for the last
5 seconds, and the electronic beep
sounds 3 seconds before the shutter
operates.)
• If you are viewing the image on the
LCD monitor, the countdown is also
displayed on the monitor. If you are
not using the LCD monitor, the
countdown appears in the No. of
shots available field on the LCD
panel.
To Interrupt the Self-Timer
Press the [MENU/EXE] button or set the Mode dial to a setting other than [s].
To Next Page
Loading...
Need help?
General
