Memo :
0
You can specify the display method (Number/
Bar) in
[LCD/VF] B [Display Settings] B “Zoom”.
This item will not be displayed when “Off” is
selected.
(A P98 [ Zoom ] )
0
Displayed in the Display 0 screen only when
there is a change.
V
Time Code (I)/User’s Bit (J) Display
0
Displays the time code (hour: minute:
second: frame)
or user’s bit data recorded in
the SD card being played back.
0
Example of time code display:
.
* Colon (:) denotes non-drop frames and dot (.)
denotes drop frames.
0
Example of user’s bit display:
.
Memo :
0
You can specify whether to display the time
code, user’s bit, or turn off the display in
[LCD/VF] B [Display Settings]
B [TC/UB].
This item will not be displayed when “Off” is
selected.
(A P
98 [ TC/UB ] )
W
Time Code Lock Indicator
When the built-in time code generator is
synchronized to the external time code data
input during the synchronization of time code
with another camera recorder, Z lights up.
(A P64 [Synchronizing Time Code on Another
Camera] )
X
Event/Warning Display Area
Displays error messages.
(
A P127 [Error Messages and Actions] )
Y
Media Status
---- : No card found in the selected
slot
STBY : Recording standby
RREC : Recording
REVIEW : Clip Review
(A P66 [Viewing Recorded Videos Immediately
(Clip Review)] )
STBY P : Pre Rec recording standby
(A P71 [Pre Rec] )
RRECP : Pre Rec recording
(A P71 [Pre Rec] )
STBY C : Clip
Continuous
Rec recording
standby
(A P72 [Clip Continuous Rec] )
RRECC : Clip Continuous Rec recording
(A P72 [Clip Continuous Rec] )
STBYC
(displayed in
yellow)
: Clip Continuous Rec recording
pause
(A P72 [Clip Continuous Rec] )
STBY N : Interval Rec recording standby
(A P74 [Interval Rec] )
STBYN
(displayed in
red)
: Interval recording pause
RRECN : Interval Rec recording
(A P74 [Interval Rec] )
STBY M : Frame Rec recording standby
(A P73 [Frame Rec] )
RRECM : Frame Rec recording
(A P73 [Frame Rec] )
STBYM
(displayed in
yellow)
: Frame Rec recording pause
(A P73 [Frame Rec] )
STOP : Unable to record to the card in
the slot
P.OFF : Power OFF
Z
Dual Rec/Backup Rec Display
“DUAL” is displayed in the Dual Rec mode and
“BACKUP” is displayed in the Backup Rec
mode.
(A P106 [ Slot Mode ] )
Memo :
0
This item is not displayed when [Slot Mode
] is
set to “Series”.
0
This item is not displayed when
[Main Menu
] B
[LCD/VF] B [Display Settings] B [Media
Remain] is set to “Off”. However, warnings will
be displayed.
(A P98 [ Media Remain ] )
0
Displayed
in
the Display 0 and Display 1 screens
during warnings only. (When the remaining time
is shorter than 3 minutes)
a
Record Trigger
STBY B : When [Rec Trigger] is set to
“On”
and recording is stopped
REC B : When [Rec Trigger] is set to “On”
and recording is in progress
b
Expanded focus
“EXPANDED” (yellow) is displayed during
expanded focus.
c
Operation lock
The r icon appears during operation lock.
(A P40 [Operation Lock Feature] )
Display Screen in Camera Mode
115
Display/Status Screen
To Next Page
