EasyManuals Logo

JVC RX-ES1SL Instructions For Use

JVC RX-ES1SL
228 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #75 background imageLoading...
Page #75 background image
71
English
PROBLEM
Surround mode cannot be selected.
DSP mode cannot be selected.
Continuous hiss or buzzing during FM
reception.
Occasional cracking noise during FM
reception.
SOLUTION
Play not multi-channel software or
check the speaker setting.
Play back Linear PCM or analog software or
check the speaker setting.
Connect an outdoor FM antenna or contact your
dealer.
Select a new station.
Check with your dealer to be sure you have the
correct antenna.
Check connections.
Move the antenna farther from automobile traffic.
NOTE
When you use the digital coaxial connection, the sounds may be intermittently distorted by the outside noise such as a lightning discharge but
they will restore automatically. This is not a malfunction.
POSSIBLE CAUSE
Surround mode is not available on the
software being played back, or only the
front speakers are set for use.
DSP mode is not available on the
software being played back, or only the
front speakers are set for use.
Incoming signal is too weak.
The station is too far away.
An incorrect antenna is used.
Antennas are not connected properly.
Ignition noise from automobiles.
FM/AM
Surround/DSP
Troubleshooting
EN70-74RX-ES1&XV-NK58[UW]f 03.5.16, 16:4371

Table of Contents

Other manuals for JVC RX-ES1SL

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the JVC RX-ES1SL and is the answer not in the manual?

JVC RX-ES1SL Specifications

General IconGeneral
BrandJVC
ModelRX-ES1SL
CategoryHome Theater System
LanguageEnglish

Related product manuals