KaVo SCAN EXAM User Manual

SCAN EXAM B-7
B. Installation and setup
B.2.4 Activate the Scan eXam unit
From the image capturing window of the
imaging application software, activate the
unit by clicking the appropriate device
button.
Before activating the device, observe
the current status of the device. Before
processing the imaging plates, make sure
that the unit is READY.
If the unit is not visible in the image
capturing window check the correct
installation.
If the image capturing window cannot be
accessed refer the user documentation of the
application software for more information on
image capturing.

KaVo SCAN EXAM Specifications

General

Type	Intraoral Scanner
Resolution	High
Imaging Technology	3D
Connectivity	USB
Software Compatibility	KaVo Dental Design, exocad