Page
32
3
SONG RECORDER
2) PLAYING BACK A SONG
The PLAY/STOP button is used to start and stop playback of the recorded song, and to also select which
song and part is played.
In the following example, the song recorded to the SONG1 memory will be played back.
Step 1
Press and hold the PLAY/STOP button, then press the PIANO1 button to select the SONG1 memory.
The LED indicator for the PIANO1 button will start to fl ash, and the LED indicators for the STRINGS/CHOIR,
and BASS buttons will turn on, indicating that PART1 and PART2 of SONG1 have been recorded.
Step 2
Release the PLAY/STOP button.
The selected song will start to play.
Step 3
Press the PLAY/STOP button to stop song playback.
The LED indicator for the PLAY/STOP button will turn off, and the song will stop playing.
Press and hold the button
1
Select SONG1
2
To Next Page
Loading...
Need help?
General
