Page
66
6
FUNCTION SETTINGS
15) SEND PROGRAM CHANGE NUMBER
This function allows the ES6 digital piano to send program change numbers. Using this function, any program
change number from 1 to 128 can be sent to external MIDI devices and instruments.
Step 1
Press and hold the TOUCH and TRANSPOSE buttons, then press the PIANO2 button twice.
The LED indicators for the TOUCH, TRANSPOSE, and PIANO2 buttons will start to fl ash, indicating that the
Send Program Change Number function has been selected.
The name of the function ‘PG#’ (Program #) and a program change number will be shown in the LED display.
Step 2
Press the
T
or
S
VALUE/BALANCE buttons to select the desired program change number.
The program change number can be set within the range of 1 to 128.
Step 3
Press both
T
and
S
VALUE/BALANCE buttons simultaneously to send the program change number.
Step 4
Press one of the TOUCH, TRANSPOSE, SOUND SELECTION, EFFECTS, or REVERB buttons to exit
Send Program Change Number mode.
The LED indicators for the TOUCH, TRANSPOSE, and PIANO2 buttons will stop fl ashing.
PROGRAM CHANGE NUMBER
Press the PIANO2 button twice Press and hold both buttons
2
1
To Next Page
Loading...
Need help?
General
