Page
45
5
RHYTHM SECTION
7) ADJUSTING THE RHYTHM SECTION
SPLIT POINT
The Split Point specifies the Lower section of the keyboard used to control the Rhythm Section chord
progression, and the Upper section of the keyboard used to play the melody. This point can be adjusted,
allowing the Lower and Upper sections to be increased or decreased.
Step 1
Press and hold the SPLIT button, then press a key on the keyboard.
The pressed key will become the lowermost note for the Upper section of the keyboard, used to control the
Rhythm Section chord progression.
The specifi ed Rhythm Section Split Point will also be used for the Split mode function.
Any changes made to the Rhythm Section Split Point will remain until the power is turned off.
When the power is turned off, the Rhythm Section Split Point will return to the default setting of ‘G2’, however it is
possible to use the Memory Backup function to store the preferred Split point. Please refer to the instructions on page
62 for more information.
Press and hold the button
Lower section: used to control the Rhythm Section chord progression
new Split Point
Upper section: used to play the melody
Press a key
2
1
Used by One Finger Ad-lib™ mode, if enabled
To Next Page
Loading...
Need help?
General
