Page
49
6
FUNCTION SETTINGS
6. FUNCTION SETTINGS
The function settings are responsible for controlling various advanced parameters within the ES6 digital piano,
and can be selected by pressing a combination of buttons.
The functions are assigned as follows:
Menu Button Pressing once Pressing twice Pressing three times
PIANO1 Brilliance * MIDI Channel * –
PIANO2 Tuning *
Sending Program Change Numbers
–
E.PIANO Voicing * Local Control On/Off * –
ORGAN Damper Effect *
Transmit Program Change On/Off *
–
HARPSI/MALLETS String Resonance * Multi-Timbral Mode * –
STRINGS/CHOIR Temperament * Channel Mute * –
BASS Lower Octave Shift * Lower Pedal On/Off * Damper Hold On/Off *
EFFECTS Auto Fill-in * One Finger Ad-lib On/Off * –
REVERB Equaliser * Memory Backup –
* Function settings can be stored using the Memory Backup function. Please refer to page 62 for more information.
SELECTING & ADJUSTING A FUNCTION
Step 1
Press and hold the TOUCH and TRANSPOSE buttons, then press one of the SOUND SELECTION,
EFFECTS or REVERB menu buttons.
Each menu button controls two or three functions. Press the menu button once, twice or three times to select the
desired function.
The LED indicators for the above buttons will start to fl ash, indicating that the function has been selected.
An abbreviation of the function name and the current settings will be shown in the LED display.
Step 2
Press the
T
or
S
VALUE/BALANCE buttons to adjust the function’s settings.
Step 3
Press one of the TOUCH, TRANSPOSE, SOUND SELECTION, EFFECTS, or REVERB buttons to exit
function setting mode.
The LED indicators for the buttons will stop fl ashing.
Any changes made to the function’s settings will remain until the power is turned off.
When the power is turned off, the function’s setting will return to the default setting, however it is possible to use the
Memory Backup function to store the preferred settings for many functions.
2
Press and hold both buttons
1
To Next Page
Loading...
Need help?
General
