Page
47
5
RHYTHM SECTION
9)
RECORDING THE RHYTHM SECTION
It is also possible to record a Custom Chord Progression to PART1 of a song memory using the Recorder
function. This allows all 88 keys of the keyboard to be played freely, while the Rhythm Section plays an
automatic accompaniment.
The following Rhythm Section settings will also be captured prior to recording:
• Rhythm Section style * • Rhythm Section part settings • Rhythm Section tempo
• Rhythm Section volume • Lower section chord progression * • Preset Chord Progression On/Off
• Preset Chord Progression style
* Changes made during recording will also be captured.
In the following example, the Recorder function will be used to capture a Custom Chord Progression to the
SONG2 memory, and then played back.
Step 1
Press the RHYTHM SECTION button.
The LED indicator for the RHYTHM SECTION button will turn on, indicating that the Rhythm
Section function has been activated.
The currently selected Rhythm Section style will be shown in the LED display.
Step 2
Press the
T
or
S
VALUE/BALANCE buttons to select the ‘Funky Beat 1’ style.
‘r10’ will be shown in the LED display.
Step 3
Press and hold the REC button, then press the PIANO2 button to select SONG2, and the STRINGS/
CHOIR button to select PART1.
Step 4
Release the REC button.
The LED indicators for the selected PIANO2 and STRINGS/CHOIR buttons will stop
fl ashing, and the LED indicator for the REC button will start to fl ash. This is the standby state
for recording.
Press and hold the button
1
32
To Next Page
Loading...
Need help?
General
