Page
48
5
RHYTHM SECTION
Step 5
Press the PLAY/STOP button to start recording.
The LED indicators for the PLAY/STOP and REC buttons will turn on, the Count-in drum pattern
will start, and a countdown will be shown in the LED display.
Step 6
Play chords in the Lower section of the keyboard.
The name of the chord will be shown in the LED display.
Step 7
Press the PLAY/STOP button again to stop recording.
The Rhythm Section will automatically play the Ending pattern, the accompaniment will stop, and
the LED indicators for the PLAY/STOP and REC buttons will fl ash briefl y as the newly recorded
part is saved to memory.
In order to playback the recording, fi rst deactivate the Rhythm Section function.
Step 8
Press the RHYTHM SECTION button again.
The LED indicator for the RHYTHM SECTION button will turn off, indicating that the Rhythm
Section function has been deactivated.
Step 9
Press and hold the PLAY/STOP button, then press the PIANO2 button to select the SONG2 memory.
The Rhythm Section will start to play, following the recorded Custom Chord Progression.
The Rhythm Section / Custom Chord Progression can only be recorded to PART1 of a recorder song.
Keys played in the Upper section will also be captured while the Rhythm Section is recording, allowing both a Custom
Chord Progression and melody to be recorded to PART1.
RHYTHM SECTION SETTINGS & REGISTRATION MEMORIES
The following Rhythm Section settings can be stored in a Registration memory (page 35).
• Rhythm Section style • Rhythm Section part settings • Rhythm Section tempo
• Rhythm Section volume • Preset Chord Progression On/Off • Preset Chord Progression style
Press and hold the button
1
2
To Next Page
Loading...
Need help?
General
