Kaye LTR -90 Operating Manual 17
Chapter 4. Parts and Controls
4.2 Setting the Temperature
When you calibrate thermocouples using the LTR-90 and the Kaye Validator, the set-points are defined as part of the
calibration procedure and automatically downloaded from the Kaye Validator to the LTR-90. To utilize automated
calibration with the LTR-90, the Validator will require version 3.62 software and firmware. If you are using the LTR-90
as a standalone instrument, Chapter 6 explains in detail how to set the temperature set-point on the calibrator using the
front panel keys.
To Next Page
Loading...
