Kaye LTR -90 - 6.1.7 Program Menu (PROG MENU); 6.1.7 a Program Setup

Kaye LTR -90 Operating Manual 33
Chapter 6. Calibrator Operation
6.1.7 Program Menu (PROG MENU)
The Program menu supplies access to the automated and manual program selections (see Figure 17 below). A Program
is a test that can be configured and run to calibrate an instrument.
Figure 17: Program Menu
6.1.7a Program Setup
Table 12 shows and describes the menu selections on the Program Setup menu.
Figure 18: Program Setup Menu Sequence
Table 12: Program Setup Menu
Item Function
1
TEST STATUS starts (ON) or stops (OFF) a Program.
66.03°C
PROGRAM MENU
RUN
PROG
RAMP/
SOAK
TEST
RESULT
66.03°C
PROGRAM SETUP
TEST STATUS: OFF
PROG
MENU
RUN
PROG
MENU
1