KEB F6 Series User Manual

OS04 Language Parameter address 0x2384
Value Description
0…7 Use the keys ▲ and ▼ to choose one of the following languages:
• 0: English
• 1: German
• 2: American
• 3:
Francais
• 4: Italiano
• 5: Russian
• 6: Espanõl
• 7: Custom
ENTER selects the desired language and returns to the submenu.
OS05 Contrast Parameter address 0x2381
Value Description
-50…50 Sets the contrast of the LCD display.
Press ENTER to change into the input mode in order to change the parameter value.
Use the keys ▲ and ▼ to adjust the contrast in a range of -50…50.
OS06 Dene font size Parameter address 0x2382
Value Description
0…4 The font size determines the complete menu view in the display.
Press ENTER to change into the input mode in order to change the parameter value.
Use the keys ▲ and ▼ to choose one of the following font sizes:
• 8, 10, 13, 16, 24 pixel
ENTER selects the desired font size.
OS07 Dene font size 2 Parameter address 0x2383
Value Description
0…4 Determines the font size of the parameter values.
OS08 Backlight mode Parameter address 0x2385
Value Description
0…2 The menu item determines the behavior for the backlight of the LC display.
Press ENTER to change into the input mode in order to change the parameter value.
Use the keys ▲ and ▼ to choose one of the following adjustments:
• 0: o󰀨 → generally o󰀨
• 1: on → generally on
• 2: Automatically → on when pressing a key; o󰀨 after 30 seconds if no key is pressed
30
NAVIGATION

KEB F6 Series Specifications

General

Communication Interfaces	RS-485, Modbus RTU, CANopen
Protection	Overcurrent, overvoltage, undervoltage, short circuit
Operating Temperature	-10°C to +40°C
Humidity	Up to 95% relative humidity, non-condensing
Control Modes	sensorless vector control (ASCL), closed-loop vector control (encoder feedback)