KEB F6 Series User Manual

OS09 Software date Parameter address 0x2182
Value Description
0.0000…
9999.1231
Software date of the operator.
Display of the year before the point, month and day behind.
2014.0513 equals 13.05.2014.
OS10 Software version Parameter address 0x2184
Value Description
Displays the software version of the operator.
OS11 Serial number Parameter address 0x2183
Value Description
Displays the serial number of the operator.
OS12 Parameter reset Parameter address 0x2388
Value Description
1 1: Resets all operator parameter to factory setting.
OS13 Node address Parameter address 0x2380
Value Description
0…239 Displays the actual drive controller node address.
31
NAVIGATION

KEB F6 Series Specifications

General

Communication Interfaces	RS-485, Modbus RTU, CANopen
Protection	Overcurrent, overvoltage, undervoltage, short circuit
Operating Temperature	-10°C to +40°C
Humidity	Up to 95% relative humidity, non-condensing
Control Modes	sensorless vector control (ASCL), closed-loop vector control (encoder feedback)