Presets 15 (Korg iMS-20 - iPad):
This preset is for use with Korg’s iMS-20 synthesizer for iPad. This allows the QuNeo to play
minor pentatonic notes from the iMS-20 and adjust voltage controlled oscillators and
effects. Each pad will send out the same pressure CC# to control a low pass filter cutoff
frequency. The X axis of each pad will control Pitch Bend. The Y axis of each pad will
control the second voltage control oscillator. The Horizontal Sliders and the Long Slider
control effects. Use the Rotaries to control the mod wheel and the tuning. The Vertical
Sliders control the VCO waveforms and pulse width.
The image below shows what each sensor controls in the Korg iMS-20 synthesizer:
34
To Next Page
Loading...