SECTION 2
Getting Started
2.1 INTRODUCTION
2.2 FRONT AND REAR PANEL
CONFIGURATION
This section contains introductory information on using
Figure 2-1 and Figure 2-2 show the respective front pan-
the Model 486 Pico-eter and the Model 487 Picoam-
ek of the Models 486 and 487, while Figure 2-3 and
meter/Voltage Source. For detailed front panel and
Figure 2-4 show the respective rear panels. Each of these
IEEE-488 bus operation, refer to Sections 3 and 4 mpec-
figures includes important information that should be re-
lively.
viewed before operating the instrument.
2-l
To Next Page
Loading...
