Kemppi MasterMig 353 User Manual

MasterMig 353, 355
Operating manual- EN
3.7 Lifting MasterMig equipment
If a gas bottle is installed on cart, DO NOT attempt to lift the cart with the gas bottle in place.
4-wheel cart:
1. Ensure that the welding equipment is properly secured to the cart.
2. Connect the 4-legged chain or straps from the hoist hook to the four lifting points on the cart on both sides of the
welding equipment.
2-wheel cart (T25MT only):
1. Ensure that the welding equipment is properly secured to the cart.
2. Connect the hoist hook to the lifting handle on the cart.
Do not lift the equipment when it is installed on the T35A cart.
© Kemppi
52
1921960 / 2217

Kemppi MasterMig 353 Specifications

General

Brand	Kemppi
Model	MasterMig 353
Category	Welding System
Language	English