Kemppi MasterMig 353 - Installing Power Source Mains Plug

MasterMig 353, 355
Operating manual- EN
2.1 Installing power source mains plug
Only an authorized electrician is allowed to install the mains cable and plug.
Do not connect the machine to the mains before the installation is complete.
Install the 3-phase plug according to the MasterMig device and site requirements.
The mains cable includes the following wires:
1. Brown: L1
2. Black: L2
3. Grey: L3
4. Yellow-green: Protective earth
Cable type and fuse rating requirements:
Unit amperage Cable type Fuse rating
350 A (380-460 V)
4 mm
2
16 A
350 A (380-460 / 220-230 V)
4 mm
2
16 / 32 A
© Kemppi
12
1921960 / 2217