MasterMig 353, 355
Operating manual- EN
1. GENERAL
These instructions describe the use of Kemppi's MasterMig welding equipment designed for light- to medium-duty pro-
fessional use in MIG/MAG welding.
MasterMig welding machines include both manual and automatic welding processes. Pulse welding is possible with the
MasterMig 355 series machines.
MasterMig series:
MasterMig product series MasterMig device model
MasterMig 353
MasterMig 353 G
MasterMig 353 GM
MasterMig 355
MasterMig 355 G
MasterMig 355 GM
MasterMig is designed to be used together with Kemppi's Flexlite GX MIG welding guns with euro connector.
MasterMig can be used also for TIG * and MMA ** welding.
* TIG welding requires the use of a dedicated Flexlite TX TIG torch with euro connector.
** MMAwelding requires a dedicated DIX-euro adapter.
Important notes
Read the instructions through carefully. For your own safety, and that of your working environment, pay particular atten-
tion to the safety instructions delivered with the equipment.
Items in the manual that require particular attention in order to minimize damage and harm are indicated with the
below symbols. Read these sections carefully and follow their instructions.
Note: Gives the user a useful piece of information.
Caution: Describes a situation that may result in damage to the equipment or system.
Warning: Describes a potentially dangerous situation. If not avoided, it will result in personal damage or fatal injury.
© Kemppi
4
1921960 / 2217
To Next Page
Loading...
Need help?
General
