MasterMig 353, 355
Operating manual- EN
CONTENTS
1. General 4
1.1 Equipment description 6
1.2 MasterMig device 7
1.2.1 Wire feed mechanism 8
1.3 MasterMig Cooler cooling unit (optional) 10
2. Installation 11
2.1 Installing power source mains plug 12
2.2 Installing cooling unit (optional) 13
2.3 Installing equipment on cart (optional) 15
2.4 Connecting welding gun 17
2.5 Connecting earth return cable 18
2.6 Installing remote control (optional) 19
2.7 Installing and changing wire 20
2.8 Installing and replacing feed rolls 25
2.9 Installing and replacing wire guide tubes 27
2.10 Installing gas bottle and testing gas flow 28
3. Operation 30
3.1 Preparing welding system for use 31
3.1.1 Filling cooler and circulating coolant 31
3.2 Calibrating welding cable 33
3.3 Using control panel 34
3.3.1 Control panel: Main view 35
3.3.2 Control panel: Memory channels 37
3.3.3 Control panel: Welding process 37
3.3.4 Control panel: Trigger logic 38
3.3.5 Control panel: Weld Assist 39
3.3.6 Control panel: Welding parameters 40
3.3.7 Control panel: System settings 42
3.3.8 Control panel: Weld data 44
3.4 Additional guidance to functions and features 45
3.4.1 1-MIG 45
3.4.2 Pulse welding 45
3.4.3 MAX Cool process 45
3.4.4 MAX Position process 46
3.4.5 MAX Speed process 46
3.4.6 Trigger logic functions 47
3.4.7 WiseFusion feature 48
© Kemppi
2
1921960 / 2217
To Next Page
Loading...
Need help?
General
