Kemppi X8 MIG User Manual

X8 MIG WELDER 2.4 Operation
The indicator panel also includes indicator LEDs which are yellow if the coolant level is too low or the coolant
temperature is too high. When the circulation is defectless, the indicator LED is green.
Press the coolant circulation button after each time you change the welding gun.
For instructions on filling the cooler, see Filling cooler.
Connecting earth return cable
Warning:
Keep the welding piece bonded or connected to earth to reduce the risk of injury to users or
damage to electrical equipment.
Figure 27: The earth return cable connector on the power source
Attach the earth return cable clamp on the welding piece.
OPERATING MANUAL | EN 102
©
KEMPPI | 2018-09-28

Kemppi X8 MIG Specifications

General

Brand	Kemppi
Model	X8 MIG
Category	Welding System
Language	English